TrippLite OMNIVS1500XL 1500VA Omni VS UPS System

TrippLite OMNIVS1500XL 1500VA Omni VS UPS System Specification

Mfr Part Number: OMNIVS1500XL
Voltage compatibility: 120 V AC
Frequency compatibility: 60 Hz
Output:
- Output volt amp capacity: 1500 VA
- Output watt capacity: 940 watts
- Output nominal voltage: 120 V AC
- Output voltage regulation: Line mode - Sine wave line voltage 120V (-18% / +8%); Battery mode - PWM sine wave output 120V +/-5%
- Output frequency regulation: Line mode - Passes line frequency of 60Hz +/-10%; Battery mode - Inverter output regulated to 60Hz +/-0.5Hz
- Outlet quantity / type: 8x NEMA 5-15R output receptacles (6 with UPS and surge suppression / 2 with surge suppression only)
Input:
- Maximum input amps: 12 A
- Input connection type: NEMA 5-15P
- Input cord length: 6 ft., 14 gauge
- Recommended electrical service: 15A 120V
Battery:
- Full load runtime: 5 minutes (1500VA / 940 watts) - add one BP24V14 for 14 minutes
- Half load runtime: 14 minutes (750VA / 470 watts) - add one BP24V14 for 34 minutes
- DC system voltage: 24 V DC
- Typical battery lifespan: 3~6 years, depending on usage
- Battery recharge rate: 2~4 hours to 90%
Voltage Regulation:
- Overvoltage correction: Input voltages between 128 and 147VAC are reduced by 12%
- Direct pass through: Input voltages between 108 and 127VAC are passed on to connected equipment unchanged
- Brownout correction: Input voltages between 93 and 107VAC are boosted by 14%
- Severe brownout correction: Input voltages between 75 and 92VAC are boosted by 30%
Surge / Noise Suppression:
- AC surge suppression: 480 joules
- AC suppression response time: Instantaneous
- Dataline suppression: Single pair of 8 wire RJ-style phone connectors protects TEL/DSL or ethernet line. Dialup phone suppression on the center two wires with 260V clamping. Ethernet suppression covers pins 1,2,3,6 with 7.5V clamping. Includes phone cable
- EMI / RFI AC noise suppression: Yes
Communications:
- Network monitoring port: Single built-in USB port supports on battery, low battery, power restored, AC line voltage, DC battery voltage and battery capacity messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment.
- WatchDog compatibility: Yes
Line / Battery Transfer:
- Transfer time from line power to battery mode: 2~4 milliseconds
- Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 75 volts or less. Resets back to line power mode as line voltage increases to 79V or higher.
- High voltage transfer to battery power: Switches to battery power as line voltage increases to 147 volts or higher. Resets back to line power mode as line voltage decreases to 143V or less.
Certifications: Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), FCC Class B (Emissions)
Special Features:
- Cold Start: Yes, inverter can be ""cold started"" to enable temporary AC output during a power failure
- Appearance: Attractive gray tower UPS
Physical:
- Material of construction: Polycarbonate
- Form factors supported: Tower, wall mountable with optional UPSWM accessory
- Cooling method: Fan
- Battery Access: Battery access door allows user replacement of UPS batteries. Hot-swappable battery replacement supported.
- Dimensions (WxDxH): 7.25 x 7.5 x 11.75 inch/ 18.4 x 19.1 x 29.8 cm
- Weight: 32.2 lbs / 14.6 kg

What other customers are saying: